Sunbeamtech Rheosmart 6 Fan Controller
Posted by: Snubbsy on: 01.03.2011 01:00:00 [ Print | 0 comment(s) ]
Smart Way Controlling of all Fans & Airflow. The Rheosmart 6 Fan Controller is designed to make any existing 3-pin fan automatically regularized by the PWM signal from the Motherboard! With six independent channels at a maximum of 30W/channel, a wide selection of fans can be supported.
The Rheosmart 6 Fan Controller operates in two different modes; when connected to a PWM-enabled motherboard, you can allow the system to auto-adjust fan speed through the motherboard's temperature sensor. When switched onto manual mode by pressing the small button below each knob, you turn that specific channel into manual control mode.
PWM/Manual Fan Controller
Aluminum and Mesh
+12 V (Standard 4 -Pin Connector)
0V - 12 V DC
3-Pin Fan Connectors
Fan RPM Knobs
5.25" Drive bay
148mm *42 mm * 82mm
It is great to see this fan controller supports up to 30 watts per channel. Theoretically, this fan controller should be able to output a combined 180 watts! Potentially you could hook this up to cold cathodes, lights or really large PC fans.
The ability for the fan controller to optionally replicate the PWM signal from your motherboard to each of the 6 channels is quite useful if you’re trying to achieve a fan-setup which will keep the noise down during idle-time, but push through some cool air when the system needs it.
Next Page - Physical Layout