Patriot Sector5 DDR3 2000 Mhz 4 GB kit
Posted by: Mac on: 30.05.2010 01:00:00 [ Print | 0 comment(s) ]
Opening the packaging we can get a much better look at the Patriot Sector5 memory.
The Patriot Sector5 comes with a “standard” green pcb (would have looked much better with a colour coded red or black pcb in my opinion) and is fitted with a large vented, aluminium I assume, heat sink. Both sides carry the Sector5 logo, one side carries the speed / timings and voltage information and the other the Patriot logo.
The information on the sticker is a little difficult to make out but as this info is available on the Patriot website it’s not too much of a problem to find out.
The heat sink is actually 2 heat sinks, I originally thought it was a wrap around unit, and as you can see adds quite a bit of height to the memory sticks so you might want to check you have the room if your heat sink over hangs your memory slots. There’s not much else I can show you so I’ll get it installed and tested.
Next Page - Installation and Testing