Posted by: Rchiileea on: 21.06.2004 00:00:00 [ Print | 0 comment(s) ]
PART 1 – In the Box
Ok so lets see what you get inside, well for starter there is a nice plain clear instruction manual.
Also included are 4 fan adapters suitable for the fans with 4 pin connecters and separate speed
monitor as well as 4 pieces of heat resistant tape (for temp nodes)and the main unit as well.
The package itself is well packed and even if it had a few bangs in transport the unit would still arrive
High-tech and modern molding
Auto & Manual mode switch
4 sets of temperature probe
4 sets of alarm temperature setting
Available for reading both fan speed and temperature at the same time
To monitor and control 4 different components' fan speeds and temperature
Intelligent cable sleeving
Large EL blue back light LCD display
Precision Electronic Button Control
PART 2 – Installing the unit
Thanks to the clear instructions installing the unit was very easy and basically the same as a cd rom the only difference is you have a 4 fan wires to connect up as well as 4 temp nodes.
The only problems I can see you having here are deciding were to put the temperature nodes and for what use, for this I decided to follow Thermaltake’s example as set out in the instruction manual. And put one on the power supply ,CPU,GFX and one loose in case After 30 minutes or re routing the wires and placing them in the best positions possible the unit was installed. All that was left to do was power up and adjust the alarm settings to my preferences